What do you think?

Replies to This Discussion

Permalink Reply by CameraClicker on February 1, 2012 at 3:18am

Well, the wiring in the distribution frame is a mess! The juxtaposition between the wire line distribution frame and the cellphone is neat. The arm of the person holding the cellphone is burned out. The whole photo is a bit blurry. The best focus seems to be at the wall near the floor.

Permalink Reply by Sudhakar on February 1, 2012 at 3:41am

This picture is taken with a Tilt Shift camera called NeinGrenze 5000T that is why picture is blurry. The reason behind taking this picture is, the person was using mobile phone while trying to solve old telephone line problem.

Permalink Reply by CameraClicker on February 1, 2012 at 4:50am

Been there. Done that. It looks like the frame is made of BIX blocks but the image is not sharp enough to be sure.

Tilt shift is useful for architecture, when you can not back up far enough and have to tilt the camera to get the top of the building in the frame.

Used like this, it just produces an out of focus image which is not very appealing. Ideally, this image would be shot with a hard lens so everything is in sharp focus. A second option would be to use a wider aperture so either the distribution frame or the technician is in sharp focus and the other is softer, depending upon which you wish to emphasize.

Adding light might be necessary to prevent burning out the tech's sleeve.

Permalink Reply by Huseyin Gokhan Orucoglu on February 1, 2012 at 1:27pm